Skip Navigation

waterstops

Water Treatment Facility Water Treatment Silo

Durajoint ® Concrete Accessories
10426 Industrial Drive
Garrettsville, Ohio 44231

Toll Free: 1-888-833-8308

Direct: 1-330-527-4308

Technical Assistance: 1-888-833-8778

Fax: 1-330-527-2440

How to splice DuraJoint PVC Waterstop

1. PVC Waterstop is spliced by cutting the two ends to be joined so that they will butt smoothly together. Use a miter box, or overlap and cut through both pieces at once.

2. Heat both ends to be joined, using an electric splicing iron, until the material melts. For best results, there should be about 1/8" of melted material at the end of each piece, but do not overheat to the point that the waterstop becomes a dark color.

3. Press the melted edges firmly together and hold for 15 to 30 seconds until the material cools. Stress should not be put on the spliced joint until the waterstop has completely cooled.

Electric Splicing Tools

2" x 14" Iron with Teflon Cover
6' Power Cord
Weight 3 Lbs.
UL Listed, 110V 600 Watts
   
4-1/2" x 14" Iron with Teflon Cover
6' Power Cord
Weight 6 Lbs.
110V 600 Watts