Skip Navigation

waterstops

Water Treatment Facility Water Treatment Silo

Durajoint ® Concrete Accessories
10426 Industrial Drive
Garrettsville, Ohio 44231

Toll Free: 1-888-833-8308

Direct: 1-330-527-4308

Technical Assistance: 1-888-833-8778

Fax: 1-330-527-2440

SEAL-Tite

SEAL-Tite is a flexible concrete construction joint waterstop that is easy to install.

SEAL-Tite will not shrink, oxidize, or harden with age and is rugged in temperatures from -30˚F to +200˚F.

When installing SEAL-Tite the concrete surface needs to be dry and free of contamination. SEAL-Tite Primer Primer is recommended when installing on wet concrete, when temperatures are below 40˚F, or in vertical joints.

-Retaining Walls  -Foundations -Manure Pits

-Concrete Pipe -Utility/Burial Vaults -Septic Tanks

-Manholes -Box Culverts

SEAL-Tite is available in two sizes:

Part No. 400SEA100 ¾" x 1" x 16'8" a roll (6 Rolls per Carton) - 100 Linear Feet per carton

Part No. 400SEA200 1˝x 36” Strips (30 Strips per Carton) - 90 Linear Feet per carton

Physical Properties

Description Method SEAL-Tite
Color   Black
Specific Gravity ASTM D-71 1.15 -1.50
Hydrocarbon Content ASTM D-4 50% min.
Volatile Matter ASTM D-6 2% max
Penetration, cone @77ºF, 150 gm; 5 sec. ASTM D-217 50-100
Flash Point, C.O.C., ºF ASTM D92 350ºF min.
Fire Point, C.O.C., ºF ASDM D92 375ºF min.
Ductility, 77ºF ASDM D113 5.0 min.
Inert Mineral filler % by weight AASHTO 30% min.