waterstops
Durajoint ® Concrete Accessories
10426 Industrial Drive
Garrettsville, Ohio 44231
Toll Free:
1-888-833-8308
Direct:
1-330-527-4308
Technical Assistance:
1-888-833-8778
Fax:
1-330-527-2440
EXPAND-Tite
EXPAND-Tite is a flexible concrete construction joint waterstop that is easy to install in non-moving joints.
EXPAND-Tite expands in a controlled fashion when exposed to moisture and will not expand beyond a point where the hydration process reduces the effectiveness of the waterstop.
When installing EXPAND-Tite the concrete surface needs to be dry and free of contamination. EXPAND-Tite Primer is also recommended before the placement of the waterstop.
| Applications: | -Tunnels | -Parking Garages | -Storage Tanks |
| -Retaining Walls | -Foundations | -Manure Pits | |
| -Pipe | -Utility/Burial Vaults | -Septic Tanks | |
| -Manholes | -Box Culverts |
Note: A minimum of two (2) inches of concrete clear cover must separate EXPAND-Tite from the face of the concrete.
EXPAND-Tite is available in three sizes:
Part No.
400EXP100 3/4" x 1" x 16'8" a roll (6 Rolls per Carton)
100 Linear Feet per carton
Part No.
400EXP200 3/8"x 3/4" x 25' a roll (8 Rolls per Carton)
200 Linear Feet per carton
Part NO.
400EXP150 1/2" x 1/4" x 16'8" a roll (5 Rolls
per Carton)
84 Linear Feet Per Carton
Physical Properties
| Description | Method | EXPAND-Tite |
| Color | Black | |
| Specific Gravity | ASTM D-71 | 1.35 ± 5 |
| Hydrocarbon Content | ASTM D-4 | 47% min. |
| Volatile Matter | ASTM D-6 | 1% max |
| Penetration, cone @77°F, 150 gm; 5 sec. | ASTM D-217 | 40±5 |
| Application Temperature | -10° -125° F | (-22° -52° C) |
| Service Temperature | -30° - 180° F | (-34° - 82° C) |
- Installation Instructions
- Expand-Tite Primer
- Rate of Expansion
- Continuous Submersion Test Results
- Cycled Submersion Test Results
- Sealant Compression Joint Pressure Test
- Sealant Cast-In-Place Joint Pressure Test
LIMITED WARRANTY
This information is presented in good faith, but we cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the application of this information or the safety and suitability of our products, either alone or in the combination with other products. Users are advised to make their own
tests to determine the safety and suitability of each such product or product combinations for their own purposes. It is the users' responsibility to satisfy himself as to the suitability and completeness of such information for this own particular use. We sell this product without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of this product, whether used alone or in combination with other products.